New! S&S EZ Loader!

DIY Fuel Injection Calibration Loader!

You no longer need to invest in an expensive fuel injection tuning device or spend tons of money on costly dyno tuning! For under $200 you can own the S&S EZ Loader that allows you to select and load S&S Cycle developed and dyno proven tune files into your ECM. These calibrations were developed exclusively for S&S Step 1 (intake & exhaust) and Step 2 (Cams) Proven Performance® products.

The S&S EZ Loader is simple to use, and as your bike evolves through the S&S 'Steps' process, you can easily change the calibration to match your configuration.  Start with Step 1: for example the S&S Stealth air cleaner and Super Sidewinder 2-into1 exhaust. Use the S&S EZ Loader to select the parts, then the calibration, load it and go.  Down the road when you are looking for more power, move to Step 2 and install a set of S&S MR103 cams, select the calibration that matches, load it and ride!

The S&S EZ Loader comes with a USB cable and instructions, and is pre-loaded with all available S&S Step 1 & 2 calibration files (at time of production). Calibrations and firmware stored on the device can be updated anytime online*. Check out www.sscycle.com/ezloader for more details.

Fitment
• 2011-‘14 103" Harley-Davidson® EFI big twins with Delphi® module
• More calibrations and models being developed daily. (Check www.sscycle.com/ezloader for more details)

Features and Benefits
• Simple plug and play operation – Plug in, select the parts that are on your bike, select the calibration, save the calibration, and then load your tune file
• Automatically recognizes your vehicle model and only shows available calibration files
• Comes loaded with all available S&S Step 1 and Step 2 calibrations (However, first time users need to do a simple online setup process to configure their S&S EZ Loader and to download the latest firmware and tune files.)
• S&S calibration files adjust fuel delivery, ignition timing, and increase rev limit (Tune files for S&S Easy Start cams may also turn off factory compression releases if needed)

• Automatically downloads latest calibrations when plugged into your computer*
• New calibration and firmware updates available online*

Bonus Functions!
• Read and clear error codes
• Re-calibrate your speedometer

·        Designed for race use only, and not legal for use on emissions controlled vehicles